Now Accepting Repairs - Visit our Repair Page

DPA Microphones ST 4006A Stereo Pair Omnidirectional Microphone Set
DPA Microphones ST 4006A Pair Front
DPA Microphones ST 4006A Pair Rear
DPA Microphones ST 4006A Pair Top Left
DPA Microphones ST 4006A Pair Right Rear
DPA Microphones ST 4006A Pair Pelican Case Open
DPA Microphones ST 4006A Pair Windscreens Clips Capsules
DPA Microphones ST 4006A Pair Rear

DPA ST4006A Stereo Pair

Regular price $5,050

HomeOutboard/RecordingMicrophonesDPA

DPA ST4006A Omindirectional Stereo Pair

Out of stock. Contact us to order one and for ETA.

The 4006A Omnidirectional Microphone is a flexible solution. Engineers, broadcasters and musicians alike can achieve clean, natural and precise sound reproduction. This mic is ideal for A-B stereo pairs for symphonic concert hall recordings. It also excels on vocals, for close-miking all types of instruments and as an outdoor interview microphone.
For reference stereo recording, there is no better choice than a d:dicate™ 4006A Omnidirectional Microphone. These omnidirectional condenser microphones are linear and true in character. They come as a hand-matched pair that offers the truest capture of stereo sound available.

Free shipping in the USA with Fedex Ground
Retro Gear Shop is an authorized DPA Microphones Dealer.
Brand New with full Warranty.
Any questions, contact us!
Directional pattern - Omnidirectional
Principle of operation - Pressure
Cartridge type - Pre-polarized condenser
Frequency response - 10 Hz - 20 kHz
Effective frequency range ±2 dB   10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz   40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted  - Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4  - Typ. 27 dB (max. 29 dB)
Distortion, THD < 1%  136 dB SPL RMS, 139 dB SPL peak
Dynamic range  - Typ. 124 dB
Max. SPL, THD 10%   146 dB SPL peak
Switchable attenuator, filters etc.  0 dB / -20 dB
Rated output impedance   200 Ω
Minimum load impedance  2 kΩ
Cable drive capability  100 m (328 ft)
Output balance principle - Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)  > 60 dB
Power supply (for full performance) - P48 (Phantom Power)
Current consumption  2.8 mA
Connector  XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color  Matte black
Weight  163 g (5.7 oz)
Microphone diameter  16 - 19 mm (0.6 - 0.75 in)
Capsule diameter  16 mm (0.6 in)
Microphone length  170 mm (6.7 in)
Maximum output voltage, RMS  8 V
Polarity  +V at pin 2 for positive sound pressure
Temperature range  -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)  Up to 90 %
Matching tolerance (frequency response and sensitivity)  ±0.5 dB
Phase deviation for kit  < 5°
DPA Microphones ST 4006A Pair Rear
DPA Microphones ST 4006A Pair Top Left
DPA Microphones ST 4006A Pair Right Rear
DPA Microphones ST 4006A Pair Pelican Case Open
DPA Microphones ST 4006A Pair Windscreens Clips Capsules