Strauss SE-PA-100
Home → Outboard/Recording → Monitors → Strauss
Strauss SE-PA-100 Stereo Power Amplifier
- Analog HGBT audio amplifier with high gain and bandwidth: High Gain Bandwidth Technology.
– Output stage with bipolar high-performance transistors – Very low output resistance
– Very high power bandwidth
– Very low noise
– Very low distortion and intermodulation
– Soft clipping
– Power buffer for all stages of voltage and current amplifications
– Regulated power supply for international AC mains voltage connection
– Aluminum housing with 10 mm wall thickness as a fully grounded block
– Convection cooling; no fans
– Loudspeaker connections with low transition resistances
Retro Gear Shop is an authorized Strauss Elektroakustik dealer.
Brand New with full Warranty.
Any questions, contact us!
- Analog HGBT audio amplifier with high gain and bandwidth: High Gain Bandwidth Technology.
– Output stage with bipolar high-performance transistors – Very low output resistance
– Very high power bandwidth
– Very low noise
– Very low distortion and intermodulation
– Soft clipping
– Power buffer for all stages of voltage and current amplifications
– Regulated power supply for international AC mains voltage connection
– Aluminum housing with 10 mm wall thickness as a fully grounded block
– Convection cooling; no fans
– Loudspeaker connections with low transition resistances
Retro Gear Shop is an authorized Strauss Elektroakustik dealer.
Brand New with full Warranty.
Any questions, contact us!
Rated power operated
90 Watt RMS into 8 Ohms; both channels
Load impedance
8 – 16 Ohms (do not use 2 – 4 ohm loads)
SOA
Current limiting and temperature protection
Frequency response
5 Hz – 130 KHz (- 3 dB); ref. 1 KHz, 0 dB
Signal-to-noise ratio
– 96 dB / 1W into 8 Ohms; 20 Hz – 30 KHz – 100 dB / 1 W into 8 Ohms; A-weighted – 119 dB / 90 W into 8 Ohms; A-weighted
THD + noise Intermodulation distortion
0.006 % / 1 W into 8 Ohms; 20 Hz – 30 KHz 0.0007 % / 1- 50 W, 8 Ohms; CCIF/DFD 19+20 KHz
Output impedance
0.003 Ohms to 0.006 Ohms 20 Hz – 20 KHz, 1 W into 8 Ohms
Damping factor
2800 — 100 Hz / 1 Watt into 8 Ohms 2800 — 1 KHz / 1 Watt into 8 Ohms 1400 — 10 KHz / 1 Watt into 8 Ohms 1400 — 20 KHz / 1 Watt into 8 Ohms
Input resistance
3 KOhms balanced XLR 1.5 KOhms asymmetrical RCA
Input sensitivity
0.93 volts for rated power XLR: differential voltage 0.93 V RCA: input voltage 0.93V
Voltage gain
29.6 dB
AC mains voltage Power consumption
100 – 240 VAC; + / – 10 %; 50 – 60 Hz Min. 100 W (standby); Max. 400 W
Fuse
100 – 110 VAC 8A slow 230 – 240 VAC 4A slow
Dimensions & Weight
Height 12.2 inches (31 cm ), Width 12.6 inches (32 cm), Depth 12.2 inches (31 cm )
Weight 50lb / 23 kg
90 Watt RMS into 8 Ohms; both channels
Load impedance
8 – 16 Ohms (do not use 2 – 4 ohm loads)
SOA
Current limiting and temperature protection
Frequency response
5 Hz – 130 KHz (- 3 dB); ref. 1 KHz, 0 dB
Signal-to-noise ratio
– 96 dB / 1W into 8 Ohms; 20 Hz – 30 KHz – 100 dB / 1 W into 8 Ohms; A-weighted – 119 dB / 90 W into 8 Ohms; A-weighted
THD + noise Intermodulation distortion
0.006 % / 1 W into 8 Ohms; 20 Hz – 30 KHz 0.0007 % / 1- 50 W, 8 Ohms; CCIF/DFD 19+20 KHz
Output impedance
0.003 Ohms to 0.006 Ohms 20 Hz – 20 KHz, 1 W into 8 Ohms
Damping factor
2800 — 100 Hz / 1 Watt into 8 Ohms 2800 — 1 KHz / 1 Watt into 8 Ohms 1400 — 10 KHz / 1 Watt into 8 Ohms 1400 — 20 KHz / 1 Watt into 8 Ohms
Input resistance
3 KOhms balanced XLR 1.5 KOhms asymmetrical RCA
Input sensitivity
0.93 volts for rated power XLR: differential voltage 0.93 V RCA: input voltage 0.93V
Voltage gain
29.6 dB
AC mains voltage Power consumption
100 – 240 VAC; + / – 10 %; 50 – 60 Hz Min. 100 W (standby); Max. 400 W
Fuse
100 – 110 VAC 8A slow 230 – 240 VAC 4A slow
Dimensions & Weight
Height 12.2 inches (31 cm ), Width 12.6 inches (32 cm), Depth 12.2 inches (31 cm )
Weight 50lb / 23 kg
